Plastic surfaces are great for giving vehicles lightweight, durable components – from plastic headlight lenses to motorcycle windshields, plastic tail lights, trailers and more. But these plastic components can yellow and haze with weather, sun and sand, limiting visibility and diminishing the appearance and value of the vehicle.Yellow plastic lenses reduce headlight brightness, and replacement with new lenses can be very expensive.While the impact on a vehicle's value varies, the dangers in terms of limited visibility are clear: It is a factor in 2.8 million accidents, 23,000 fatal crashes and 2,300 pedestrian deaths each year, according to the Motor Vehicle Lighting Council. Dim headlight bulbs and hazy plastic headlight lenses or surfaces may lead to this reduced visibility, putting you, your passengers and other cars at risk. The AAIA Car Care Council found that 26 percent of the cars it inspected had issues with their lighting system. Millions of cars on the road today have plastic headlight lenses. The problem increases with the age of the lens, and with the average age of cars on the road about 10 years old, the problem is growing.

 By restoring clarity to the lens, the performance of the headlight is improved  and the appearance of the vehicle is enhanced and level of safety is  increased. 

You can produce professional restoration  results in three step using The 3M Headlight Lens Restoration System.

1.Sand the hazed surface in a two-stage wet sanding process with the enclosed sanding pads from 3M Headlight Lens Restoration System until the surface is smooth and the dulled layer is removed. A spray bottle and water used in the wet sanding process.
2.Polish with the 3M plastic polish, 
3.Buff with the buffing pad to the level of clarity desired in the plastic. In addition to a standard household drill mentioned (1200-1600 rpm) used in the buffing process.
3 step to restore car lenses clarity
3 steps to restore car lenses clarity

In the past, replacing scratched, clouded or yellowed plastic headlight covers was an expensive necessity in order to preserve safety. But now with the 3M Headlight Lens Restoration System, car and motorcycle owners can shine and restore plastic lenses — including headlights, tail lights, fog and directional lights — to like-new condition for a fraction of the cost. This kit includes everything needed to restore two headlight lenses, excluding the user-supplied household drill (1200-1600 rpm), automotive tape, clean cloth, and spray bottle.

The Do-It-Yourself Solution
The 3M Headlight Lens Restoration System is designed to give do-it-yourselfers an easy and affordable way to repair their vehicle's plastic lens surfaces. Containing various graded sanding pads, pad holders, buffing pads, polish and detailed instructions, it includes everything users need to turn their household drill into a low cost solution to this dangerous automotive problem. 
ALL the kits include:
1 - 3M drill backing plate
4 - P800 grit white abrasive discs
6 - P500 grit yellow discs
1 - P3000 Trizact foam disc
1 - Orange foam compounding pad
1 - 1 oz. 3M headlight lens polish sample

  • Use The "yellow" sanding disk with the drill attachment. The headlight will take on a more cloudy, but uniform, appearance
  • Use the "white" disk and smooth out the surface
  • Use the "gray" disk (with water) and begin the polishing of the surface
  •  Finally use the "orange" foam disk with the polishing compound and complete the job.
Instructions are included with the kit and are pretty straightforward. Anyone can do this job in approximately 2 hours or less. The drill attachment is well worth the money.
More information about this system in 3M 39008 Headlight Lens Restoration System


Read More
ford grille
Fits like a dream, install took 5 minutes, and all you need  just  screwdriver, that's it. Simple  description to describe this great ford  grille.Great looking piece that fits and looks like it was installed from the factory. It is made of strong durable material that is made to last.The design of the product is very smart: It uses the license plate mount points in the front opening. The bottom drops in snugly and the top is easy to fasten down. And it cover the hole wide open ford bumper from 2009 on, even the new F-150s have this gap just waiting to eat rocks and other debris.It has no effect on intake temp after the intercooler. Measured and IAT2 was the same difference before and after the grill.

ford bumper
ford grille
 APS F66789H Black Powder Coated Aluminum Billet Grille Bolt Over for select Ford F-150 Models
Here you are the technical detail:
Brand APS
Item Weight 1.4 pounds
Product Dimensions 25 x 6 x 3 inches
Item model number F66789H
Exterior Black Powder Coated
Manufacturer Part Number F66789H
Folding No

 More information about it:
  • Bolt Over/Overlay/Bolton 1 pc Grille Insert
  • Each grille guarantees a whole black satin powder coating with a neat surface.
  • Air craft grade 6061-T6 aluminum solid billet grille inserts can protect the front end of your vehicle. Whole black powder coating with a neat surface.
  • Custom fit applications for each trucks, cars and SUVs. 
    More information about it: Coated Aluminum Billet Grille Ford F-150 Models
Read More